[. . . ] Always leave a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. Mains fuse This information applies only to products with a UK mains plug. • • the ratings shown on the plug, a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. [. . . ] • charge or play music from your iPad directly through the dock connector. • play music from other audio devices through the AUDIO-IN socket. a a Line out socket • (To use the microphone separately) connect to the MIC input socket of an existing Hi-Fi system. b Battery compartment c OFF/ON • Switch the microphone on or off. d Power indicator • Light up red when the wireless microphone is switched on. Bluetooth® speaker What's in the box Check and identify the contents of your package: • Wireless microphone EN 5 b a c de h gf a • Turn the unit on/off. b Power/Bluetooth® indicator • Indicate the power/Bluetooth® status. d • (Press) pair with a Bluetooth® enabled device that supports A2DP (Advanced Audio Distribution Profile). • (Press and hold) pair with the wireless microphone in case automatic pairing fails. e Dock for iPad f SOFTWARE UPGRADE (not for use by end users) g AUDIO-IN • Connect an external audio player through a 3. 5mm audio input cable (not supplied). h AC MAINS~ • AC power socket. 6 EN Always follow the instructions in this chapter in sequence. Tip •• If the speaker stays idle for more than 15 minutes, it switches to standby mode automatically. Connect power Caution •• Risk of product damage!Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit. When you unplug the AC power cord, always pull the plug from the socket. •• Before you connect the AC power cord, make sure that you have completed all the other connections. Install/replace microphone batteries Caution •• Risk of explosion!Keep batteries away from heat, •• Danger of explosion if batteries are incorrectly sunshine, or fire. •• Batteries contain chemical substances, so they should be disposed of properly. 1 Open the battery compartment and take out the battery cartridge. • Connect the AC power cord to • the AC MAINS~ socket on the back of the Bluetooth® speaker. • the wall power socket. Switch on the Bluetooth® speaker • Press on the top of the Bluetooth® speaker. [. . . ] No power to the Bluetooth® speaker •• Make sure that the AC power plug of the device is connected properly. •• As a power-saving feature, the speaker switches to standby mode automatically after staying idle for more than 15 minutes. Switch on the speaker again (see 'Switch on the Bluetooth® speaker' on page 7). [. . . ]